The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit part # SH27FRT which is a fit for a 2019 Volvo XC90 comes with a 7 to 4-way adapter plug so you can hook up to a trailer with either trailer connector. view full answer...
The Westin Bull Bar will indeed include all necessary bracketry and installation hardware. My contacts at Westin tell me that it will install on a Ranger that does not have fog lights or tow hooks. view full answer...
I would personally go with Roadmaster's stuff. They've had a really good track record in my experience and have been an industry favorite for a while.
So, for your 2023 Jeep Grand Cherokee you're going to want the Roadmaster Direct-Connect Base Plate Kit # RM77ZR for a base plate and the Roadmaster Nighhawk # RM-676 for a tow bar.
This tow bar will easily attach to the base plate using the direct connect brackets, has an integrated LED light for low light conditions, and has an 8K capacity... view full answer...
The Falcon tow bar, # RM-522, has a channel to run the safety cables through so you will want to use straight safety cables like the 64 inch Single Hook, Straight Safety Cables, # RM-645. Safety cables are not included and must be purchased separately.
We also have a towing combo kit, # RM-9243-1, that includes the safety cables and accessories needed for the RM-522 Falcon tow bar. Let me know if you need further assistance. view full answer...
The correct 6-pole round receiver to 7-way blade plug adapter for your tow vehicle to RV hook-up is the Hopkins # 47435 that is referenced. view full answer...
The Roadmaster XL Base Plate Kit, item # 284-1, for the 2008 and 2009 Chrysler Town and Country and the 2008 and 2009 Dodge Grand Caravan comes complete with all installation hardware and the front arms that hook up to a tow bar for towing the vehicle.
Along with the base plate kit you may also need the following parts to complete your towing setup.
Tow Bar # RM-501 or # RM-520
Safety Cables # RM-645 or # RM-643
Tow Bar Wiring # 38955 or... view full answer...
The etrailer XHD Non-Binding Tow Bar for Blue Ox Base Plates # e67ZR you referenced comes with the attachment pins and lynch pins to secure it to the base plate. Sometimes the pictures on the website don't show the hardware or miscellaneous pieces that come with some products but I double checked the instructions and they are included with the tow bar.
All of the base plate kits will include the hardware to install it on the vehicle, the tow bar will come with the hardware to hook up... view full answer...
In regards to the Roadmaster Direct-Connect Base Plate Kit part # 131-8, the base plate tab and removeable arms are sold as a kit. The base plate tab is not offered separately. That said, if you need to replace the removeable arms we do have an option for this, the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS
Please note, the Roadmaster Direct-Connect Base Plate Kit fits the following vehicles:
1992 - 1994 Chevrolet Blazer excluding 1-ton and Diesel
1987 - 1998 Chevrolet... view full answer...
If you are just talking about the installation hardware, yes - all of the mounting hardware is included in the Westin MAX Winch Mounting Tray # 46-23555 for your 2018 Ram 2500. However, you will need additional tools for the installation. Here are the tools you need for the install:
- 14mm socket
- 15mm socket
- swivel socket
- extensions
- 16mm socket
- 16mm wrench
- 18mm socket
- 18mm wrench
- ratchet
- torque wrench
With these tools, you will be able to complete the installation.... view full answer...
The Ford Replacement OEM Tow Package Wiring Harness, # 118242, includes the wiring and relays needed to replace the factory 7-Way on a truck that has the factory tow package. If the original tow package included a battery isolator feature it would be part of the tow package wiring on the truck and not in these replacement items.
In order to see if the 7-Way has power even with the key off, you can test the 7-Way at the back of the truck with the key off using a circuit tester like # PTW2993.... view full answer...
The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part # RP94716-61301 does not come with safety chains but we do offer some that will work great with this, the Tow Ready Safety Chain Kit with Clevis Hooks part # 49150. view full answer...
Yes, the Curt Weight Distribution System, # C17322, comes with everything you will need including the shank and a ball. I have included a link to the installation instructions for you.
You will want to make sure that this is the best system for your needs. Weight distribution systems should be selected based on the tongue weight of the trailer plus the weight of anything loaded behind the rear axle of the towing vehicle.
This system has a tongue weight capacity range of 800 to 1,000... view full answer...
The 2-Child Thule Coaster XT Bike Trailer and Stroller # TH10101803 does come ready to attach to a bike. It uses what is called an ezHitch system to allow the stroller to be "towed" by your bike.
To go along with this stroller I do recommend the Transparent Rain Cover # TH20110700 just in case you get caught in wet conditions.
I've added links to video reviews for you to check out as well. view full answer...
The Blue Ox Avail part # BX7420 does come with coiled safety cables. You'd need a high low adapter at around 13 inches like the # BX88132 which gets as close to that as possible at 10 inches. As long as you are within 3 inches up or down the adapter would be correct. view full answer...
No, the Curt Class II hitch receiver # C12076 does not include a ball mount, hitch pin or clip. You will need to add a hitch ball of appropriate size to match your trailer and a pin and clip # F-4.
I have included a link to our page for Class II hitch balls with the required 3/4-inch shank diameter (to match the supplied ball mount which has a 3/4-inch ball hole). With this link you can select a Class II hitch ball of the appropriate size to match your trailer coupler, either 1-7/8 inch... view full answer...
The # ETBC7 is going to have everything you need, including the mounting bracket you're looking for, but since the Curt # C13315 has a concealed crosstube behind the bumper, you might have some difficulty mounting the bracket to the tube. For that reason you may want to use the Curt Easy Mount Bracket # C58000 which connects to the receiver tube and provides a mounting surface for your 7-way connector.
As for the RedArc Tow-Pro Elite # RED44FR , I can't recommend that enough. It's going... view full answer...
I can see how either way would "in theory" work well, but what we've gotten from our weight distribution manufacturers is that you let it auto level first and then set the system up so that the WD's spring bar tension is accurate for how the vehicle's suspension configuration and not be too severe.
Otherwise if you do the auto-level after the WD system you may end up with the WD and the air system working against each other. view full answer...
The Roadmaster Second Vehicle Kit # RM-98800 that you mentioned is meant for use with the Roadmaster # RM-9700. This kit includes a second brake away kit, brake signal wire, diode, and wiring for installation.
For the monitor that is mounted in the mobile home that indicates if the brakes in your 2004 Jeep Wrangler are activated, you will want the Roadmaster Second Motorhome Monitor Kit # RM-98850. This kit includes both the light and audio indicators that signal that the brakes in your... view full answer...